Pneumatic Badge making machine 25-75MM Badge Maker Pin Button Press Cutter 0.5W

Pneumatic Badge making machine 25-75MM Badge Maker Pin Button Press Cutter 0.5W. Rely on air pump (air compressor) instead of manpower, assisted by foot switch instead of hand pressure, greatly improve efficiency, reduce manpower, per hour can do about 700 finished products, save time and effort! Name: pneumatic badge making machine. Daily output: 5,000-6,000 units per day (about 700 units/hour). Net Weight:25kg, with mold weight:approx. Packing: packed in single wooden case. The air compressor tank must not be less than 50L and the pressure must not be less than 0.7MPA. 1 x machine (without air pump). 1 x Set of moulds (mould sizes 25/32/37/44/50/56/58/75mm). This machine need to work with Air pump (not included), please know that.

Air pump tips:(not included). The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight manual measurement deviation for the data.

---